top of page

Instalation

BohemianVan magnetic window covers are designed to make installation and everyday use as easy as possible.

Most of our window covers simply need to be placed against the window, where powerful neodymium magnets hold them securely in place. When installing, always make sure the rougher side faces outward and the smooth, glossy side faces the interior. The BohemianVan label also helps you identify the correct orientation – it should be visible when viewed from inside the van.

Our window covers for the windshield and MaxxFan require additional magnets to be installed before their first use. You'll find detailed installation instructions below.

čelní sklo

Windshield

The windshield window cover is secured at the top using powerful magnets. Some are sewn directly into the window cover, while others come with 3M adhesive tape and need to be attached to the inside of the windshield during the initial installation. The package also includes 3M cleaning wipes with isopropyl alcohol.


Installation Instructions:

  1. Prepare the windshield. Use the included cleaning wipes to thoroughly clean and degrease the upper part of the windshield where the magnets will be attached. The surface must be clean and dry.

  2. Position the window cover. First, align its bottom edge along the lower edge of the windshield. Make sure it is properly centered and fits snugly against the edges of the glass on all sides.

  3. Secure the window cover. Gradually press it upward, starting from the center. Use the sun visors on both the left and right sides to hold it in the correct position while attaching the magnets.

  4. Attach the magnets. Remove the protective backing from the adhesive tape on the magnets at the top of the window cover and press them onto the prepared areas of the windshield. Press each magnet firmly against the glass for several seconds.

  5. Allow the adhesive to cure. After attaching the magnets, wait at least 72 hours before putting them under prolonged load from the window cover.


Important Notes:

  • The recommended temperature for applying the adhesive is 15–25 °C.

  • Do not touch the adhesive surface with your fingers after removing the protective backing.

  • Carefully check the position of the window cover before attaching the magnets. Repositioning magnets that have already been attached may weaken the adhesive bond.

instalace na čelní okno Mercedes Sprinter
instalace na čelní okno Mercedes Sprinter
maxxfan

MaxxFan

Along with your MaxxFan window cover, you'll receive a set of magnets with double-sided 3M adhesive tape and a cleaning wipe with isopropyl alcohol. You'll also need a screwdriver for installation.

 

Installation Instructions:

  1. Remove the plastic frame surrounding the MaxxFan vent.

  2. Prepare the window cover. Place it on a flat surface with the rougher black side facing up.

  3. Clean the frame. Use the included 3M cleaning wipe to thoroughly clean and degrease the inside of the plastic frame where the magnets will be attached. Allow the surface to dry.

  4. Align the frame. Place it on top of the window cover and carefully center it.

  5. Position the magnets. Place the supplied magnets on the inside of the frame, aligning them with the magnets sewn into the window cover. Before attaching them, make sure the magnets attract each other.

  6. Attach the magnets. Remove the protective backing from the adhesive tape and press the magnets firmly onto the prepared areas. Then reinstall the plastic frame on the MaxxFan vent.

 

All done! Your window cover is now securely held in place by magnets attached to the plastic frame, allowing you to easily install or remove it whenever you like.

WhatsApp Image 2024-12-19 at 19.17.56.jpeg
WhatsApp Image 2024-12-19 at 19.18.25.jpeg
WhatsApp Image 2024-12-19 at 19.18.32.jpeg
Screenshot 2026-03-07 at 22.18.12.png
max_2_instalace2.jpg

Cleaning/Maintenance

Clean your window covers with a soft, damp cloth, using a little mild detergent if needed. Avoid harsh chemicals, solvents, or abrasive sponges, as these may damage the fabric surface. After cleaning, allow the window covers to air dry completely before folding and storing them.

bottom of page